1、清洁：将地面的灰尘和污染清理干净；
1. Cleaning: Clean up the dust and pollution on the ground;
2、打磨：将原地面进行打磨直至露出骨料部分；
2. Grinding: grinding the original ground until the aggregate part is exposed;
3、找平：地面不平整地方需要使用混凝土找平；
3. Leveling: concrete leveling is needed in uneven areas.
4、涂刷第一遍：均匀涂刷混凝土密封固化剂，切记要均匀不能有遗漏，刷涂完后要保持地面湿润状态半个小时；
4. Brush the first time: uniformly brush the concrete sealant solidifying agent, remember that there should be no omission, after brushing to maintain the wet state of the ground for half an hour;
5、二次打磨：第一遍完成后地面需要进行二次打磨，去掉地面不平整地方；
5. Second polishing: After the first polishing, the ground needs second polishing to remove the uneven ground.
6、涂刷第二遍：涂刷第二遍混凝土密封固化剂材料，同样保持湿润半个小时。
6. Paint the second time: Paint the second time the concrete sealing solidifying agent material, also keep wet for half an hour.
7、打磨：再一次打磨地面。以便后续的抛光步骤。
7. Grinding: Grinding the ground again. For subsequent polishing steps.
8、抛光：增加表面光亮度。
8. Polishing: Increase surface brightness.