| 施工过程中如何使用混凝土密封固化剂 |
| 添加时间：2018/11/26 14:19:00 浏览次数： |
| 1、施工过程中如何使用混凝土密封固化剂 1. How to Use Concrete Sealing and Curing Agent in Construction 一是在浸泡纳路特混凝土固化剂时特别注重泡材料要选择在白天，不要等到晚上，随时观察地面情况，如发现地面发干或发白，赶快洒水进行稀释，一定要保持混凝土密封固化剂材料渗透过程中地面保持湿润;二是一定要用扫把扫动混凝土固化剂，使固化剂在地面分布很均匀;三是泡完混凝土固化剂材料后，一定要用吸水机把地面多余的固化剂吸干净，并尽量清洗干净。这样方可避免地坪出现的泛白情况。 First, when soaking Nalute concrete curing agent, special attention should be paid to the choice of foaming materials in the daytime, not in the evening, at any time to observe the ground situation, such as found that the ground is dry or white, sprinkle water quickly to dilute, we must keep the ground moist in the process of penetration of concrete sealing curing agent material; second, we must use broom. Sweep the concrete curing agent to make the curing agent distribute evenly on the ground. Third, after soaking the concrete curing agent material, we must use a water absorber to absorb the excess curing agent on the ground and clean it as much as possible. In this way, the white situation on the floor can be avoided. 2、混凝土起灰起砂使用混凝土密封固化剂后出现发白的处理方法 2. Treatment of whitening after using concrete sealing and curing agent 这时可以采取湿磨的方法，用研磨机带800目或1000目的树脂磨片去湿磨地面，视地面情况磨3-5遍，然后再用水洗，用吸水机吸干多余的水分。 At this time, wet grinding method can be adopted, with a grinder with 800 mesh or 1000 mesh resin grinding discs to wet ground, according to the situation of the ground grinding 3-5 times, and then washed with water, with a water absorber to absorb excess water. |
| 上一页 水泥地坪渗透型密封固化剂 |
| 下一页 选用混凝土密封固化剂 |
Copyright © 技术支持：遨游网络